Skip to main content

Lens Flare

Lens Flare simulates the effect of a flare caused by light passing through objects in the camera view.

properties

Add Lens Flare​

To add a Lens Flare effect:

  1. Go to the Inspector panel.
  2. Click + Add Component.
  3. Go to Post Effect.
  4. Click Post Process.
  5. Under the Post Process property, click Add Effect.
  6. Click Lens Flare.

Properties​

PropertyDescription
IntensityThe intensity of Lens Flare. Values range between 0.00 and 1.00. See the demonstration below.
PositionThe position of Lens Flare. See the demonstration below.

Demonstrations​

Intensity​

image-0
image-1

Intensity = 0.40

Intensity = 0.80

Position​

image-0
image-1

X = 0.00

X = 1.00

image-0
image-1

Y = 0.00

Y = 1.00